好咧
就这样吧

An iDiot'sGuide To iMessage

来源:https://www.tonymacx86.com/threads/an-idiots-guide-to-imessage.196827/


This is intended as a quick and easy guide to enable the average user to configure for iMessage services.
It is acknowledged that it will not work in all cases but should assist a great many people if only by giving an understanding of the processes involved to enable iMessage.
It is not intended as a help thread, requests for help will be deemed off-topic and removed.
For help with iMessage refer to the comprehensive How to Fix iMessage Guide thread.

Links to all of the referenced files are at the end of this first post.
Despite them being at the end of the instructions, now is a good time to download them.

If you have tried and failed previously then there are some steps to take before you start again.

Open Safari and log in to iCloud.com 
Click on Find iPhone
Click the down arrow next to All Devices
If there are spurious devices in the list from previous failed attempts click each one and Remove from Account.
You should also remove any unwanted devices from your Apple ID through the link on the iCloud page,
or by directly logging in to your Apple ID page.

Sign Out of iCloud.com

Close Safari

Open System Preferences - iCloud : Click Sign Out

Disconnect from the network then Restart


Open a Finder window and click on your User Name then in a blank area right click and select 
Show View Options and from the resulting window select Show Library Folder.

Open the newly revealed Library folder and select Caches
From the Caches folder delete all files and folders beginning with :

  • com.apple.iCloudHelper
  • com.apple.imfoundation.IMRemoteURLConnectionAgent
  • com.apple.Message

In Finder navigate to Username/Library/Preferences and delete all files and folders beginning with

  • com.apple.iChat.
  • com.apple.icloud.
  • com.apple.ids.service
  • com.apple.imagent.
  • com.apple.imessage.
  • com.apple.imservice.

Empty the Trash and Restart.

**************************************************************************

Start here
It has been said that you must have a credit card registered with your AppleID in order to use iMessage,
I can neither confirm or deny this as I have never tried it without.



You must have a working Ethernet connection which is defined as BuiltIn and en0.
An easy way to determine this is with the DPCIManager app.
It is possible to connect with a Wireless adaptor but you must have working Ethernet which is BuiltIn and en0 too.
This is the most basic fundamental and the one that is overlooked most by laptop users although it is equally valid for desktop users too.
The exception to this is when you have a machine that does not have Ethernet, in this case it is acceptable (with the appropriate SMBIOS) to have the Wireless adaptor as en0 but it must be identified as BuiltIn too.

The next requirement is a correctly configured SMBIOS.

In the interests of simplicity the examples shown will use the CloverConfigurator app but it should be noted that this is not the only (or best) way to achieve the required result.
What is certain is that you should never edit your config.plist file with a text editor as this can corrupt the formatting. A corrupt config.plist is the same as having no config.plist at all.

You should already have determined the optimum System Definition for your hardware.
If you subsequently change your System Definition you must run through the procedure detailed in this guide again.

Before starting to configure for iMessage you should ensure that your config.plist is otherwise correctly set up for your specific hardware.
The following examples refer only to changes required to your existing config.plist.
It is not suggested that anything not shown in the examples should be removed from your own config.plist unless specifically mentioned.

If you haven't already, install CloverConfigurator to your /Applications folder.



From the /Applications folder run Clover Configurator
Mount the EFI partition
File - Open - EFI/CLOVER/config.plist



In the left pane select Rt Variables
From the ROM dropdown list select UseMacAddr0
Make sure that the MLB box is empty
Set BooterConfig to 0x28
Set CsrActiveConfig to 0x67




In the left pane select SMBIOS
Click the Magic Wand tool
Click on the picture appropriate for your intended System Definition.




From the dropdown list, choose the desired System Definition.
Click the shake buttons several times to generate a Serial Number - Click OK.




Copy the Serial Number and check it on http://www.everymac.com/ultimate-mac-lookup/
Paste the Serial Number into the box and click Lookup
Prove that you are not a robot




If you see this response your serial number is invalid - Go back to the magic wand and generate another one.



If you see a response similar to this it means that you have generated a serial number in a recognisable format and it is ok to proceed to the next stage.



Open the https://checkcoverage.apple.com site and paste your Serial Number into the box
Enter the required code and click Continue




This is the part of the process which confuses people the most so pay particular attention :

If you see the message "Your Service and Support Coverage" and a picture of a computer
then you have generated the Serial Number of a computer that is already recorded in Apple's database.

Do not use this Serial Number - Go back to the Magic Wand tool and generate a new one.




If you see the message "We're sorry, but this serial number is not valid. Please check your information and try againand the Serial Number has passed verification at everymac.com then it is OK to use this Serial Number for your config.plist.

This is so important that it is worth repeating :  
You need a Serial Number that everymac.com confirms is in the correct format and that Apple says is not valid.
It does not mean that it is not a valid Serial Number - It means that it is not already registered.

Quit Safari




Open a Terminal window and type uuidgen (and press Return) several times to generate some random UUIDs.



Copy one of your random UUID numbers from the Terminal window and paste it into the SmUUID box in Clover Configurator.

In Clover Configurator select File - Save
Quit Clover Configurator.

Restart

From your /Applications folder run Clover Configurator,
Mount the EFI partition.
Select File - Open - EFI/CLOVER/config.plist

Once your config.plist file has loaded into Clover Configurator :

Open a Terminal window

Open a Finder window and browse to the location where you downloaded simpleMLB.sh
Drag simpleMLB.sh from Finder onto the Terminal window, click inside the Terminal window and press Return



Copy the generated number then paste it into Clover Configurator - SMBIOS - Board Serial Number.

In Clover Configurator select File - Save

Quit Clover Configurator and Terminal.

Restart

Open a Finder window, browse to the location where you downloaded iMessageDebug and run it.
Press y and Return to save a copy called iMessageDebug.txt.

Restart

Open a Finder window and browse to the location where you downloaded iMessageDebug and run it.

Compare the output with the saved copy.
If the two copies are the same you may reconnect to the network and proceed to set up iMessage.
The last line in the output of iMessageDebug is subject to change but does not appear to be a cause for concern.

If you follow the guide and get a failed ROM in iMessageDebug you may need to install EmuVariableUefi-64 and RC Scripts with the Clover installer. This seems to particularly apply to those with 100 series motherboards.

**************************************************************************

The examples shown are for the Clover boot loader that has been installed in UEFI mode.
If you have installed Clover in Legacy mode then the procedure is the same except that your config.plist
is located in the /EFI/CLOVER folder on your System disk.

For brevity the guide is for users of El Capitan as this is the operating system that most people will be using at the time of writing.  
If you use a different version of the operating system then you should adapt these instructions to your own requirements.

This is not intended as a help thread, requests for help will be deemed off-topic and removed.
For help with iMessage refer to the comprehensive How to Fix iMessage Guide thread.

Clover Configurator - iMessageDebugv2 - simpleMLB - DPCIManager


相关推荐

最新回复 1

  1. 1 楼
    操作过程:
    1、打开cloverconfigurator挂载EFI
    2、打开config.plist
    3、在Rt  Variables里面,先保证里面都是空白的
    4、去SMBIOS里面,点击魔术棒。根据你机器的配置选择适合你Mac机型。每点击一次,就产生一个随机的序列号,多点击几次。最后点击确定。
    5、用生成的序列号去https://selfsolve.apple.com/搜索。如果你得到一个错误信息,那么你很辛运。这意味着这个序列号没有分配到一个白苹果使用。如果你没有得到一个错误提示,重复步骤4,寻找新的序列号。
    6、打开终端运行”uuidgen”。
    7、复制此UUID和粘贴在“smuuid”字段中的SMBIOS节。
    8、在“Board  Serial  Number”字段中,在您的系统上面得到的序列号(魔杖产生)添加5个随机字母和数字,最终达到17个字符。步骤7和8是为了保持每次开机时ROM(UUID生成,最后12位)和MLB(Board  Serial  Number)是标准和唯一的OS值。如果该值从开机启动发生变化,那么iMessage会无法激活,苹果将把你的UUID、序列号或苹果ID拉入黑名单,三叶草生成的ROM和MLB值也自动列入黑名单,如此而已。
    9、保存config.plist
    10、在终端,运行命令:
    1)输入com.apple.finder  AppleShowAllFiles  TRUE
    2)killall  Finder
    11、前往文件夹//Users/[Username]/Library/Chaches,删除所有文件或文件夹(如果没有这些文件,就不用管)
    1)com.apple.messages
    2)com.apple.imfoundation.imremoteurlconnectionagent
    12、前往文件夹/Users/[Username]/Library/Preferences,删除所有文件或文件夹:(如果没有这些文件名,就不用管)
    1)com.apple.ichat。
    2)com.apple.imagent。
    3)com.apple.imessage。
    4)com.apple.imservice。
    13、前往文件夹/Users/[Username]/Library,删除“Messages”文件夹(如果没有那个文件名,就不用管了)。
    14,清空垃圾桶。如果说文件仍在使用,立即启动后清空
    15、打开磁盘工具,选择你的系统分区,并重建权限。完成后重启
    16、令人兴奋的时刻到来:打开iMessage尝试登录。会发现iMessage能正常使用了。
    17、如果iMessage可以使用的话,你可以用终端命令重新隐藏文件和文件夹:
    1)输入com.apple.finder  AppleShowAllFiles  FALSE
    2)killall  Finder
    有什么问题可以随时问我!希望这些对大家有帮助。
    另外:一些用户指出,你的网络必须设置en0。你可以用关于本机-系统报告,点击任一以太网或WiFi,确保您的  BSD  设备名称为en0。如果不是,重新设置您的网络进/Library/Preferences/SystemConfiguration和删除"NetworkInterfaces.plist”和“"preferences.plist"。
    admin 9月前 引用